Coat Hook Buying Guide: Fixing, Load & RFQ Checklist
Wall hooks, coat hooks, adhesive utility hooks and clamp-on desk hooks use different fixing methods and load paths. Match the hook to the substrate and intended item.
1. Choose the fixing family
| Hook type | Fixing | What to confirm |
|---|---|---|
| Screw-mounted wall or coat hook | Screws into wall, panel, rail or furniture | Base size, hole pattern, projection, substrate and suitable anchors |
| Self-adhesive hook | Pressure-sensitive adhesive on a prepared surface | Bonding area, surface finish, temperature/moisture, curing time and load direction |
| Clamp-on desk/bag hook | Clamp grips a desk, shelf or panel edge | Clamping range, pad/contact material, edge profile and tightening method |
| Multi-hook rail | Several hooks share one mounting plate or rail | Overall length, hook spacing, mounting points and combined load distribution |
2. Describe the item and load direction
State whether the hook carries coats, bags, towels, tools or decorative items, plus the expected working load per hook. A bag can impose a different outward force from a garment hanging close to the wall. For multi-hook products, describe simultaneous use rather than multiplying a single-hook label.
3. Match the mounting substrate
Identify concrete, masonry, timber stud, plywood, particleboard, hollow wall, glass, tile, painted metal or another surface. The installer should select screws/anchors for the actual substrate. For adhesive products, request preparation and curing instructions; textured, dusty, wet or low-surface-energy materials may not be suitable.
4. Check projection, spacing and safety
Measure hook projection, opening, base size and clearance from doors or walkways. Confirm spacing for garments and bags. For schools, children’s rooms, accessible routes or tight corridors, consider rounded edges, mounting height and the risk of protruding hardware.
5. Finish and corrosion exposure
Separate decorative colour from material and corrosion requirement. State bathroom, kitchen, outdoor or coastal exposure where relevant. Confirm the material/finish of the visible hook, base, moving parts, clamp screw and included fixings.
Hook RFQ checklist
| Use | Coat, bag, towel, tool or other item; working load and frequency |
|---|---|
| Fixing | Screw, adhesive, clamp or rail; substrate and panel/edge thickness |
| Geometry | Projection, opening, base, hole pattern/clamp range and spacing |
| Environment | Interior/exterior, humidity, cleaning and corrosion exposure |
| Appearance | Material, finish, edge shape and approved sample |
| Commercial | Quantity per design/finish, included fixings, packing and destination |
Common buying mistakes
- Comparing load labels without substrate and loading direction.
- Applying adhesive hooks to an unverified surface.
- Ignoring projection into a walkway or door swing.
- Assuming pictured anchors suit every wall.
- Using decorative finish as proof of corrosion resistance.
Browse and enquire
Compare the coat and utility hooks collection. Include the substrate, item/load and fixing preference in the enquiry.
Prepare a hook quotation
Send the use, mounting surface, geometry, finish, quantity and destination.